Configurator
design your own flightcase from the comfort of your home
1. Select the packaging type:
Mixing console
Pedalboard
DJ equipment
Other
2. What are the dimensions of your device?
Enter the name of the device for which the case will be intended:
Enter the name of the device for which the case will be intended:
Name of the device for which the case will be intended:
Enter the name of the device for which the case will be intended:
Width
mm
Height
mm
Depth
mm
Enter the name of the device for which the case will be intended:
Standard case
A popular classic among transport cases. Constructed from plywood materials and all-metal hardware, this type of case is suitable for all conceivable conditions, from small concerts to world tours.
Fusion case
Elegant lightweight suitcases that will dazzle not only your teammates. The main feature is the sandwich plastic panels and plastic corners, which, despite the material used, can withstand very rough handling. The case can also be made of plywood.
GEAR
Touring wheels, including chassis
Number of U
AT
2. What are the required dimensions?
Depth
mm
and
This is the usable depth between the front and rear rack rails, or the rear of the rack. Usually the dimension of the deepest device plus a reserve for connectors.
What will be the design and equipment of the rack?
SLIDING DOOR RACK
A practical system for opening rack cases, where the lid is inserted either into the top/bottom or into the sides of the rack. The advantages are quick opening and closing and, above all, the problem of excess lids is eliminated.
CLASSIC RACK
A popular design, suitable for all types of rack modules. Compared to the Sliding door rack, the advantage is easy access to the device (it is not so recessed inside the rack body). The disadvantage is the lids, which get in the way at concerts.
GEAR
Touring wheels, including chassis
Rack rails also at the back
Lid only at the front (back wall solid)
Suspension (silent blocks under rack rails)
2. What are the required internal dimensions?
Width
mm
Height
mm
Depth
mm
and
We make pedalboards exclusively from plywood materials and lowered aluminum profiles to keep the bottom board with effects as close to the ground as possible. The case is fully padded with 10mm foam as standard, and the lid has a gentle "eggbox" foam glued in. We include about one meter of self-adhesive Velcro with the finished case to fix your devices.
2. What should the case for your counter look like?
!
We approach the packaging for mixing consoles individually. For small consoles with up to 16 faders, these are usually simple solutions, while larger consoles require more complex and equipped cases. Please choose from the following options:
The exact name of the mixer
3 piece
A classic for large consoles - especially if some of the elements are located below the front edge of the mixer.
2-PIECE CASE
Design suitable for small and medium counters.
GEAR
Wheels
Space for connectors at the back
Fixed folding box behind the counter (so-called "doghouse")
Wooden skids instead of rubber feet underneath
1U height rack drawers under the counter
Storage space in the counter lid
2. What should your DJ suitcase look like?
!
Protecting DJ equipment is a very specific discipline. We produce cases for individual components as well as entire DJ sets.
CLASSIC CASE
The bottom is the same height all around - some devices may be difficult to access from the front.
REDUCED PROFILE
Snížený přední profil a zvýšené boky kufru - u DJ's oblíbená konfigurace.
2. What should your suitcase look like?
This category is for suitcases of all types - from small suitcases to large "cable cars".
Enter the maximum internal dimensions of the case:
Width
mm
Height
mm
Depth
mm
What will be the design and basic equipment of the packaging?
STANDARD CASE
A popular classic among transport cases. Constructed from plywood and all-metal hardware, this type of case is suitable for all conceivable conditions, from small concerts to world tours.
FUSION CASE
Elegant lightweight suitcases that will dazzle not only your teammates. The main feature is the sandwich plastic panels and plastic corners, which, despite the material used, can withstand very rough handling. The case can also be made of plywood.
GEAR
Touring wheels, including chassis
Partitions (specify in note)
Fully removable lid (case without hinges)
3. Materials:
Standard plywood 6.5mm thick
Popular materials - the most economically interesting, mechanically sufficient, waterproof.
Birch brown plywood
most used material
Hexa brown plywood
more resistant to abrasion
How to choose the right material?
For the vast majority of music cases, materials up to 7mm thick are perfectly suitable - whether standard, premium or plastic. All of them will reliably protect your equipment and are more about aesthetic appeal. However, hexa and premium plywood have the most scratch-resistant surface.
Packaging can also be designed from 9mm thick plywood - we recommend this for heavy duty use in AV rental shops and in industry where a large number of people handle equipment.
and
Premium, double-sided foil-coated plywood, 6.8mm thick
Design surfaces, resistant to mechanical damage, are about 10% heavier than standard. Waterproof.
_JPG.jpg)
Plastic sandwich panels, 6.8mm thick
40% lighter material compared to standard plywood, less scratch-resistant, mechanically problem-free.
Only for FUSION case
Only for FUSION case
Only for FUSION case
Only for FUSION case
4. Padding
Foam materials
We use proven foam materials to provide maximum protection for the equipment being transported. We will design the padding to suit the nature of the suitcase.
Plastazote thicknesses 5, 10, 15, 20, 30, 40 and 50mm
Corrugated "eggbox" foam, 22mm thick
